CMX-USB is targeted at systems which need USB device connectivity and the USB interface is provided to the End Point management level. CMX-USB provides an integrated suite of USB device functionality that also includes pre-built packages for several targets. Adding device USB connectivity just got easier for the embedded developer.

CMX-USB Base System
CMX-USB-BS handles all the basic setup and management of the USB system. The system assumes a USB Device Controller which handles all of USB up to the end point level. Also, part of the CMX-USB-BS system is the USB configuration including: Vendor ID, Product ID, End Point Type, End Point Addresses, Bulk, Interrupt, Control channels.

CMX-USB Bootloader
CMX-USB-BL is the reliable way to allow field upgrades of your product.
The optional CMX-USB-BL code is a standalone system which allows an application to download new application code to the target. (CMX supplies a Windows application for this). The footprint of CMX-USB-BL is less than 8K bytes and so can be held as a permanent, reliable boot-stub on a single small flash sector. This can then handle all future firmware upgrades.

CMX-USB-EP Embedded Pipe
CMX-USB-EP: The easy way to connect your embedded application to your host application!
The CMX-USB-EP module is designed to allow your embedded application to communicate with your host application without needing to be concerned about USB. On the embedded side, the application simply opens, reads and writes to a pipe. CMX also provides a Windows driver which creates standard Comm Objects on the PC which any application or script can simply read or write. Sample applications are provided for a number of languages including VC++ and VBScript.

File Systems
CMX also provides file system solutions for embedded systems. In particular the CMX-FFS-FAT and CMX-FFSTHIN products are optimal solutions for running fully featured FAT file systems on Microcontrollers. The standard features include FAT12/16/32 and long filenames which make it as simple as possible to access standard flash devices both from your embedded application and through USB mass storage.

Integrated Packages
CMX offers complete pre-ported packages for several Microcontrollers. A complete tested project can be delivered including reference schematics which means that the developer gets an instant success in the project and can immediately focus on their core competences.
 
Currently complete tested packages can be ordered for:
 
AT91SAM7S
LPC2148
STR71x
 
These packages work on various standard evaluation boards. Please contact CMX for more information about this.

CMX Systems, Inc.
CMX Embedded Software Products are shipped royalty free, with full 'C' source code, 6 months technical support and software updates.
CMX also offers RTOSes, TCP/IP Stacks, Flash File Systems and CANopen software for embedded designers.

 

For more information please contact the MicroWay sales team:
Head Office MicroWay Pty Ltd PO Box 84, Braeside, Victoria, 3195, Australia Ph: 1300 553 313 Fax: 1300 132 709 email: sales@microway.com.au ABN: 56 129 024 825	Sydney Sales Office MicroWay Pty Ltd PO Box 1733, Crows Nest, NSW 1585, Australia Tel: 1300 553 313 Fax: 1300 132 709 email: sales@microway.com.au ABN: 56 129 024 825	New Zealand Sales Office MicroWay Pty Ltd (NZ) PO Box 912026 Victoria Street West Auckland 1142, New Zealand Tel: 0800 450 168 email: sales@microway.co.nz
International: call +61 3 9580 1333, fax +61 3 9580 8995