mission_statement
Phone - Australia: 1300 553 313
Hotline - New Zealand: 0800 450 168
 
Segger Embedded Software Solutions
Embedded Software Solutions
 

Flasher STM8

Flash programmer for STM8 series of flash microcontrollers with on-chip flash

Features

  • All STM8 devices can be programmed
  • Integrated optical isolation between host and target system
  • Standard 4-pin SWIM connector
  • USB 2.0 interface
  • Full duplex 100Mbit Ethernet interface
  • Target voltage can be measured & monitored during program
  • Fully plug and play compatible
  • USB, Ethernet, RS232 and 4-pin ribbon cable included
  • Windows PC software included
  • Target power supply via pin 1 of the 4-pin interface (up to 300mA to target with overload protection) 

 Software and documentation download

 

Package content

Flasher STM8 is delivered with the following components:
Flasher STM8 Ethernet cable 4-pin flat ribbon cable RS232 cable 1:1 female / male USB cable USB power supply


Specifications

General
Supported OS Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
Windows 7
Windows 7 x64
Electromagnetic compatibility (EMC) EN 55022, EN 55024
Operating temperature +5C ... +60C
Storage temperature -20C ... +65 C
Relative humidity (non-condensing) Max. 90% rH
Size (without cables) 121mm x 66mm x 30mm
Weight (without cables) 122g
Mechanical
USB interface USB 2.0
Ethernet interface 100Mbit, full duplex
RS232 Host interface RS232 9-pin
Target interface SWIM 4-pin connector
SWIM interface, Electrical
Power supply USB powered, 100mA for Flasher STM8. 500mA if target is powered by Flasher STM8.
Target interface voltage (VIF) 1.2V ... 5V
Target supply voltage 4.5V ... 5V (if powered with 5V on USB)
Target supply current Max. 300mA
LOW level input voltage (VIL) Max. 40% of VIF
HIGH level input voltage (VIH) Min. 60% of VIF

10-pin Needle Adapter

SEGGER offers the 10-pin Needle Adapter, which has been designed to connect Flasher 5, Flasher 5 PRO, Flasher ST7 or Flasher STM8 to a PCB which does not come with a mating connector or programming header. The designed pattern with 3 locating pins ensures, that the adapter can only be connected in one way.

The 10-pin needle adapter allows manufacturers to save costs and space on their PCBs since there is no need to provide the PCB with additional connectors. It adapts from the 10-pin, 0.1 inch connector to a 10-pin, 0.05 inch needle pattern.

Download speed

Flasher STM8 has been designed to allow downloading to the target as fast as the target can receive and program flash. The table below shows the measured download speed for standalone programming and for programming via PC driven software. The following testing environment has been used:
  • PC with 2.53 GHz Core2Duo, running WinXP
  • USB 2.0 port
  • USB 2.0 hub
  • STM8S208MBT6B
Operation Standalone mode PC mode
Program (128kB) 8.5s (15kB/s) 8.5s (15kB/s)
Program and verify (128kB) 11.3s 11.3s

 

 


For more information please contact the MicroWay sales team: buynow
Head Office
MicroWay Pty Ltd
PO Box 84,
Braeside, Victoria, 3195, Australia
Ph: 1300 553 313
Fax: 1300 132 709
email: sales@microway.com.au
ABN: 56 129 024 825
Sydney Sales Office
MicroWay Pty Ltd
PO Box 1733,
Crows Nest, NSW 1585, Australia
Tel: 1300 553 313
Fax: 1300 132 709
email: sales@microway.com.au
ABN: 56 129 024 825
New Zealand Sales Office
MicroWay Pty Ltd (NZ)
PO Box 912026
Victoria Street West
Auckland 1142, New Zealand
Tel: 0800 450 168
email: sales@microway.co.nz

International: call +61 3 9580 1333, fax +61 3 9580 8995

 
© 1995-2014 MicroWay Pty Ltd. All Rights Reserved. Terms and Privacy Policy.