mission_statement
Phone - Australia: 1300 553 313
Hotline - New Zealand: 0800 450 168
Segger Embedded Software Solutions
Embedded Software Solutions
 

Flasher Secure

Secure programming tool for ARM, Renesas RX and Freescale PowerPC based series of microcontrollers.

Flasher Secure is a mass production programming system, capable of protecting the vendor's IP regardless of the production site. It provides full control over the programming process at contract manufacturers (CM) and similar environments.

Features

  • Authenticated production
  • Production volume control
  • CM administration and setup portal
  • Ultra fast programming
  • Supports Cortex-M/R/A, RX, PPC
  • Prevents production of counterfeit units
  • No overhead in programming time

Documentation download (Flasher Secure uses the same software and documentation package as J-Link)

Secured Production at Contract Manufacturers

It is common to employ a contract manufacturer (CM) to mass-produce products. CMs have access to customer IP and large quantities of the components they are contracted to produce. Because of this, it is essential that customers control both their IP and limit CM production to prevent theft and secure revenue. To combat these threats, Flasher Secure uses mutual authentication, authorisation, and confidentiality to secure your IP and production run. As an IP owner, you have full end-to-end control of your production chain.

Segger Secure

End-to-End Security

Flasher  Secure  supports  vendor-specific  trusted firmware  features  to  ensure  end-to-end  encryption, authentication  and  confidentiality  covering  the  whole process including the 'last mile'.

Secured Firmware

Modern products carry a huge amount of intellectual property (IP). From the IP owners point of view most of the IP is located inside the firmware. IP owners want to protect their IP. The Flasher Secure system uses authentication algorithms to make sure, that only authorized boot loaders and firmware are used in the system. If one component is not genuine, the device will stop working. Simply copying the

Package content

Flasher Secure is delivered with the following components:
Flasher Secure Ethernet cable 20-pin, 0.1" target ribbon cable RS232 cable 1:1 female / male USB cable USB power supply

 

 


For more information please contact the MicroWay sales team: buynow
Head Office
MicroWay Pty Ltd
PO Box 84,
Braeside, Victoria, 3195, Australia
Ph: 1300 553 313
Fax: 1300 132 709
email: sales@microway.com.au
ABN: 56 129 024 825
Sydney Sales Office
MicroWay Pty Ltd
PO Box 1733,
Crows Nest, NSW 1585, Australia
Tel: 1300 553 313
Fax: 1300 132 709
email: sales@microway.com.au
ABN: 56 129 024 825
New Zealand Sales Office
MicroWay Pty Ltd (NZ)
PO Box 912026
Victoria Street West
Auckland 1142, New Zealand
Tel: 0800 450 168
email: sales@microway.co.nz

International: call +61 3 9580 1333, fax +61 3 9580 8995

 
© 1995-2018 MicroWay Pty Ltd. All Rights Reserved. Terms and Privacy Policy.